Star Micronics TUP992-24 Einstellungsanleitung

Stöbern Sie online oder laden Sie Einstellungsanleitung nach Etikettendrucker Star Micronics TUP992-24 herunter. Star Micronics TUP900 TUP942-24 Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 8
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
TUP900
Quick Setup Guide
Thank you for choosing Star Micronics as your provider for printing solutions.
Unpacking the Unit
Contents
a. Printer
b. Paper Shaft
c. 1” Paper Core Adapter
d. 2” Paper Core Adapter
e. 3” Paper Core Adapter
f. Shaft Weight*
g. Interface Mounting Screws(2)*
h. Paper Core Adapter Screws(2)
*Not Pictured
Assembly – Installing the Interface
Place the interface sub-assembly into the
interface slot as shown. Take care to be sure the
interface cartridge is seated properly into its
connector.
Using a #2 Phillips screwdriver, install the
mounting screws included with the printer.
Interface Type…
Parallel
Serial
USB
Ethernet
Starski says, “Place
unused parts in a
safe place for later
use.”
Seitenansicht 0
1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - TUP900

TUP900 Quick Setup Guide Thank you for choosing Star Micronics as your provider for printing solutions. Unpacking the Unit Contents a. Printer b.

Seite 2 - Starski says, “The size of

Assembly – Paper Roll Setup It is necessary to adjust the paper roll holder for the width of the paper you use. If the setting position is incorrect,

Seite 3

Assembly – Paper Roll Setup Continued Once the paper roll holder is properly configured for the roll to be used, simply insert the roll holder into t

Seite 4

Assembly – Connecting the Power Supply The TUP900 requires a 24 VDC power source for proper operation. Star recommends use of the PS60L-24A (pt. no.

Seite 5

To begin, simply select the printer for which you are installing the driver. In this case; we are installing the TUP992 (TUP900 series kiosk printer

Seite 6

Once the printer and port have been selected, an easily recognizable name for the printer should be assigned. This name will show up in the Printer

Seite 7

Printing a test page will allow for confirmation that correct installation and communication are established and working properly. Installation i

Seite 8

Additional Documentation This “Quick Setup Guide” is a condensed summary of the information available from all of the manuals available on the provid

Kommentare zu diesen Handbüchern

Keine Kommentare