Star-micronics TCP2000 Series Bedienungsanleitung PDF herunterladen (Seite 8)

APPEARANCE AND NOMENCLATURE

Housed unit TCP100/2000 series

[TCP100] [TCP2000 back]

1 Switch Cover This cover protects the power switch of the system.

Push to open and close.

2 Power Switch This switch turns the power of the system ON/OFF.

3 POWER LED This LED indicates that the power of the system is on.

4 READY LED This LED indicates that the card processing is ready.

5 OK LED This LED indicates that the card has been processed

without error.

6 ERROR LED This LED indicates that the card has not been read due

to an error e.g. jamming of the card in the reader/writer.

RS232C Serial Connector

This connector interfaces the connection between host

computers and the reader/writer.

8 AC Power Inlet Connect this inlet to the power source with the attached

AC power cable.

9 Cleaning Button Push this button under the power ON condition, then

insert the cleaning card which is soaked with the clean-

ing liquid.

Modular Connector

This interfaces the connection between MCD2000 (Star

original numerical key pad).

Interface convert switch

This switch changes the available interface : RS232C

(right side) or modular connector (left side).

IMPORTANT!

A three terminal earth grounded power supply cable is attached to TCP100/

2000 housed unit. For safety, do not remove the ground pin.

1 2 3 4 5 6 7 8 9 10 11 12 13

Keine Kommentare

Star-micronics TCP2000 Series Bedienungsanleitung Seite 8