Star Micronics SM-S220i-DB40 Handbuch PDF herunterladen (Seite 17)

- 10 -

4. Press down on both sides of the printer cover to close it rmly.

When you close the printer cover, make sure that it is closed on both sides.

5. Use the tear bar to cut the extra paper.

CAUTION

When the paper is jammed, be sure to open the printer cover before removing the

jammed paper.

Do not under any circumstances try to pull out the jammed paper forcefully while the

printer cover is closed. Doing so may damage parts of the printer.

Caution Symbol

is symbol is placed near the thermal head to indicate that it may be hot.

Never touch the thermal head immediately aer the printer has been used.

Also, even when the thermal head is not hot, do not touch it, because static electricity can

damage the devices inside the thermal head.

WARNING

1) Do not touch the tear bar.

• ereisatearbarinsidethepaperoutletslot.Notonlyshouldyounotputyourhandinthe

paper outlet slot while printing is in progress, never put your hand into the outlet even when

printing is not in progress.

• epapercovercanbeopenedwhenreplacingthepaper.However,sincethetearbarison

the inside of the paper cover, be careful not to place your face or hands too close to the tear

bar.

2) During and immediately aer printing, the area around the thermal head is very hot. Do not

touch it, as you could be burned.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 30 31

Keine Kommentare

Star Micronics SM-S220i-DB40 Handbuch Seite 17