Star Micronics SM-T400i-DB50 Handbuch PDF herunterladen (Seite 21)

- 14 -

1) Communication mode

It is possible to change the communication mode setting between Bluetooth and serial. Please see

below for details to select the proper communication mode for your application.

Bluetooth (iOS):

The display shows [Bluetooth(iAP)]. At the Bluetooth (iOS) mode, the printer can communi-

cate with an iOS device over Bluetooth.

Bluetooth:

The display shows [Bluetooth Mode]. At the Bluetooth mode, the printer can communicate

with an Android device or a device other than iOS devices over Bluetooth.

RS-232C:

The display shows [UART Mode]. At the RS-232C mode, the printer can communicate with a

device using the serial communication cable supplied with the printer. When you connect

the serial cable, the printer is automatically switched to serial communication from Bluetooth

communication.

2) Auto sleep function at iOS mode [Bluetooth(iAP)]

When the iOS device wakes up from the sleep mode, it is required to turn the printer on again. It is

required by the iOS specications. Therefore, it is impossible to use the Auto sleep function when

the Communication mode of the printer is set to iOS mode [Bluetooth(iAP)].

At iOS mode [Bluetooth(iAP)], set the Auto sleep mode to “NO USE” or Auto OFF mode.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 30 31

Keine Kommentare

Star Micronics SM-T400i-DB50 Handbuch Seite 21