Star Micronics TSP2000 Bedienungsanleitung PDF herunterladen (Seite 102)

– 98 –

APPENDIX

Notes 1. A shield cable must be used.

2. It is not possible to drive two drives simultaneously.

3. The peripheral drive duty must satisfy the following:

ON time / (ON time + OFF time) ≤ 0.2

4. The resistance of the peripheral drive solenoid must be 24 Ω or

higher.

If it is lower than 24 Ω, over-current may flow into the solenoid,

causing the solenoid to burn.

Modular plug: MOLEX 90075-0007,

AMP641337, or JAPAN BURNDY B-66-4

Shield

Wire lead

Modular plug

E-1. Peripheral Drive Connector

Pin No.

Signal

Function

I/O

name direction

1 FG Frame ground —

2 DRD1 Drive signal 1 OUT

3 +24V Drive power OUT

4 +24V Drive power OUT

5 DRD2 Drive signal 2 OUT

6 DRSNS Sense signal IN

Appendix E: Periheral Unit Drive Circuit

1 2 ... 97 98 99 100 101 102 103

Keine Kommentare

Star Micronics TSP2000 Bedienungsanleitung Seite 102