Star Micronics SP2000 Bedienungsanleitung PDF herunterladen (Seite 43)

N = 3 (ESC/POS mode)

: Always “0”

Parameter Setting “1” to “3”

CR code See below

5) N = 4 (Star mode)

: Always “0”

Para. Setting “0” “1” “2” “3”

X on/X off Timing When Every 3 When Every 3

Toggled sec Toggled sec

RTS Signal Condition Save as Save as Always Always

DTR DTR SPACE SPACE

Receive buffer size 4 kbytes 4 kbytes 256 bytes 256 bytes

Data receipt error “?” Ignored “?” Ignored

Printed Printed

n4 CR code

“0” Ignores

“1” Ignores

“2” Feeds line after printing (same as <LF>

“3” Prints (no line feed.)

n4 CR code

“0” Prints (no line feed.)

“1” Feeds line after printing (same as <LF>

“2” (Parallel Interface)

Prints and feeds line when nAutoFd signal is “LOW”.

Does not feed line when “HIGH.”

(Serial Interface)

Ignores

“3” Ignores

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 80 81

Keine Kommentare

Star Micronics SP2000 Bedienungsanleitung Seite 43