Star Micronics TSP143IIU ECO Handbuch PDF herunterladen (Seite 11)

– 8 –

3-4. Turning Power On and Power O

Important:

is printer is not equipped with a power switch.

1) e following four conditions are necessary to turn on the printer.

• e computer is turned on.

• e printer's power cord is plugged into an AC outlet.

• e printer is connected to a computer using the USB cable.

• e sleep switch is set to Active when it is available.

2) If the printer is malfunctioning, unplug the power cord and disconnect the USB cable to

turn o the printer.

O l

3-4-1. Turning Power On (Print Ready Mode)

ere are two ways to turn on the power. When the sleep

switch is available, check that it is set to Active.

1) Turning power on manually

Make sure that the printer’s power cord is plugged into an

AC outlet.

Connect the USB cable to the USB port of a computer that

is turned on. When the USB cable is connected, the printer

turns on and the POWER lamp on the control panel lights

up.

2) Turning power on automatically

Make sure that the printer’s power cord is plugged into an

AC outlet.

Make sure that the USB cable is connected to the USB port

of a computer that is turned o. When the computer is

turned on, the printer turns on and the POWER lamp on

the control panel lights up.

Sleep Switch

Active

Sleep

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 29 30

Keine Kommentare

Star Micronics TSP143IIU ECO Handbuch Seite 11