Star Micronics TSP143IIU ECO Handbuch PDF herunterladen (Seite 19)

– 16 –

(2) Position the printer over the screws, etc.,

on the wall and then slide it downward to

set it in place.

Aer setting the printer in place, check

the screws on the wall again to make sure

that they are able to support the printer’s

weight.

CAUTION

• The printer’s weight is approximately

2.4 kg when the largest diameter roll pa-

per is loaded.

• Use screws on the wall that have both

shear strength and pulling-out strength

to withstand a force of at least 12 kgf

(118 N).

(3) Push the cover open lever, and open the

printer cover.

(4) Insert the roll paper as shown.

(1) Attach the holding plate to the printer.

en tighten the two screws that were

supplied to secure it in place.

ø4

2 to 3 mm

ø7 or more

Flangeless screws

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 29 30

Keine Kommentare

Star Micronics TSP143IIU ECO Handbuch Seite 19